Does it cost less to buy a ready-made campervan or to do your own DIY conversion? This is a great question and one that is commonly asked by people who have the skillset, or the confidence, to convert a van themselves.
The honest answer? It can be cheaper to convert your own, but it isn’t always as straightforward as comparing the cost of a van and a list of materials against the price of a finished campervan.
For a lot of people, time is money. So I guess the first thing to establish is timeframes. Would you be prepared to dedicate your time to converting one? Is this a side project that you can chip away at in the evenings and weekends, or is it something you could undertake from start to finish, without too many breaks in between?
There’s also a big difference between having the skills to do something and having the time to do it.
And then there’s the question of what you actually want to build. Do the readily available models fulfil your requirements or would you do something different if you were starting with a blank canvas? One of the biggest advantages of building your own is the freedom to tailor the layout, specification and functionality to suit your needs. If you have very specific requirements, that flexibility can be incredibly valuable.
But I’d always encourage people to challenge themselves on whether those differences are genuinely going to improve their experience, or whether they’re simply different for the sake of being different.
I always insist that the more you’re able to use your campervan, the better value for money it becomes. There’s nothing more costly than getting it all wrong, spending a considerable amount of money and then finding the van doesn’t suit the way you want to travel.
I've written previously about not taking too much advice from forums and online communities. There’s plenty of good information out there but ultimately, your requirements are unique to you. What works brilliantly for one person might be completely unsuitable for another.
So ask yourself not just what it will cost to build, but what will it cost to get the campervan you actually want?
Think about the costs you might not have considered. When comparing a DIY conversion against a professionally-built campervan, it’s easy to focus on the obvious costs – the base vehicle, the materials, the appliances and the equipment.
But what about the tools you might need to buy? The materials you get wrong and have to replace? The specialist work you might need to outsource? Or the additional costs that creep in as the project evolves and you decide to add just one more feature?
Even if you undertake most of the work yourself, there may be elements that require specialist knowledge, particularly when it comes to electrical systems, heating, gas and vehicle safety. That is a vital point to consider from a safety perspective.
None of this means you shouldn’t do it yourself. For the right person, the process can be hugely rewarding, and learning how everything works can be a real advantage further down the line.
But it’s worth going into the project with your eyes open and allowing for a contingency in both your budget and your timescale.
There’s also an interesting distinction between spending money and creating value. You might save money by doing the work yourself but that doesn’t automatically mean you’ll recover the same amount when you come to sell it. Buyers may be more cautious about an unfamiliar conversion, particularly if the quality of the installation, the specification or the documentation is difficult to verify. Type Approval is a huge talking point in today’s market and at CamperKing it’s vitally important. Our Freedom model has Whole Vehicle Type Approval and we hope our Go! model will soon follow, with testing currently underway.
Campervans also still sit in the “luxury purchase” bracket meaning that from a working perspective, a campervan is a non-essential item. In the same way that a diamond necklace is. People tend to buy them because they can, not because they need to, and that means a recognised brand or proven quality will almost certainly be more attractive than something that isn’t. I’m not saying the quality is any less, it’s just comforting from a buyer’s perspective to go with an established and respected brand.
A professionally converted campervan with a recognised specification, a documented build history and appropriate warranties are likely to appeal to a wider range of buyers. Of course, resale value will always depend on the vehicle, condition, mileage and market demand, but it’s an important part of the overall calculation.
I’ll also tell you something that doesn’t always get discussed when people are comparing campervans.
Like a new house, a newly built campervan can have settlement issues and snagging requirements. It might be a squeak, a rattle, an adjustment to a cupboard door or, occasionally, a component that fails.
No manufacturer is immune to the possibility of something needing attention. The difference is how well the product has been developed, how consistently it has been built and what happens when something does go wrong.
If you choose a manufacturer that regularly builds a particular model, there should be opportunities to identify and resolve recurring issues, refine the production process and improve consistency over time. That experience matters. A model that’s been developed through repeated production runs is likely to benefit from lessons learned along the way, although no build process is entirely free from faults.
Regulation and compliance matter, too. Vehicle and conversion requirements can change, and a reputable manufacturer should have processes in place to keep its products compliant with the applicable requirements.
When you’re building your own, you are responsible for understanding what applies to your vehicle and conversion. That’s not necessarily a problem, but it’s another consideration that can be overlooked when the excitement of designing your dream campervan takes over.
Let’ say it’s March. The weather is starting to improve, the days are getting longer and you’re looking forward to getting away with the family over Easter and through the summer.
You decide to buy a van and convert it yourself.
What happens if the project takes longer than expected? What if a component is out of stock, something doesn’t fit as planned, or you have to put the project on hold because life gets in the way?
Suddenly, the season you were planning to enjoy in your campervan is disappearing before you’ve even had the chance to use it.
A professionally converted campervan isn’t necessarily available immediately either. Build slots and lead times can vary considerably, so planning ahead is important whichever route you choose. However, buying an already completed model, or one that’s available from stock, can offer a much quicker route to getting away.
And this is where I think the conversation becomes particularly interesting.
If you’ve spent six or even 12 months converting a van, you’ve saved money on the labour, but you’ve also spent a significant amount of time not using it. For some people, that’s part of the enjoyment of the project. For others, it’s time they would much rather have spent travelling.
Neither approach is wrong, but it’s worth being honest about which type of person you are.
For me, aftercare is critical to the long-term enjoyment of a campervan.
Buying a campervan is only the beginning of the ownership experience. Over time, you might need expert advice, maintenance, repairs or help to understand how a particular system works. Having someone you can call, who knows the product and can help you get back on the road, has a value that’s difficult to put a price on.
If you build your own, you have the advantage of knowing the vehicle intimately. You know how you’ve put it together, where everything is and, hopefully, how to fix it when something needs attention. That’s a genuine benefit.
But what happens when you’re away from home? What if you encounter an issue that you can’t resolve yourself, or need a specialist component or repair?
With a professionally built campervan, the quality of the support will depend on the manufacturer and the arrangements they have in place. A good manufacturer or dealer network can offer reassurance, technical knowledge and a route to getting problems resolved without you having to work everything out alone.
If you had someone willing to take care of that for you, rather than having to do it all yourself and in your own time, what would that be worth? It’s worth asking that question before you buy rather than after something goes wrong.
Unfortunately, I don’t think there’s a universal answer.
If you’re technically minded, enjoy working with your hands, have the space to work and genuinely enjoy the process of building something, converting your own campervan can be a fantastic option. You have the freedom to create something personal, develop new skills and potentially save money.
But if your priority is getting away with the family, making the most of weekends and holidays, and having the reassurance of a professionally built product with ongoing support, then buying a ready-made campervan is more likely to be the better investment for you.
I’d also encourage you to look beyond the initial purchase price. Consider the total cost of the vehicle, the conversion, the equipment, your time, the potential resale value and the support available throughout ownership.
And perhaps most importantly, think about the opportunity cost. What else could you be doing with the time you’d spend building it?
For me, the lifestyle is the whole point. It’s the weekends away, the spontaneous trips, the memories with the family and the freedom to go wherever you fancy. A campervan sitting on the drive for 12 months while you finish the conversion isn’t delivering much of that lifestyle, regardless of how cheaply you build it.
Ultimately, it’s about understanding what matters most to you. Finding the right manufacturer or dealer to partner with, or choosing to do it yourself, is a personal decision.
Just make sure you’re comparing like for like, that you understand the compromises, you get expert help for electrical systems, heating, gas and vehicle safety, and that the end result is a campervan you’ll genuinely love using.
Because the best-value campervan isn’t necessarily the one that costs the least to buy or build. It’s the one that gives you the most enjoyment from the money you’ve invested in it.
After all, the aim isn’t simply to own a campervan. It’s to get out there and use it.